MULTIPLEX MODULES DISCONNECTION PROCEDURE PRIOR TO
WELDING
PROCEDURE NO: PR060041
REVISION 01
2010-12-01
Page 1 of 7
Material: N/A
Equipment(s): Phillips-head screwdriver
Ratchet handle
3/8" socket
Electric tape
Long nose pliers
Reference schematics: N/A
Safety rules: - Wear safety goggles
- Set the battery master switch to the OFF position first
Recommendations: This procedure should be performed by qualified personnel only.
Effective
Revision 00 : New procedure for cooling 2007
Revision 01 : Modified for EPA 2010
To Next Page
Loading...
