Section 18: BODY
PA1593
15
6. X3-45 COACHES EXTERIOR FINISHING AND BODY REPAIR
The following procedures explain the steps to be followed for proper repair, installation and replacement
for various doors, panels and windows. The paragraph divides the vehicle into zones to facilitate the
search; each zone is then sub-divided into components.
Refer to the appropriate zone then component for complete procedure.
FIGURE 7: X3 COACHES ZONING 18623
6.1 ZONE 1
FIGURE 8: ZONE 1 18624
6.1.1 Front Bumper
The front bumper is hinged to give access to the
steering gear and front towing quick connectors
for maintenance purposes. Pull the handle
located in the front service compartment to open
the front bumper compartment. Bumper must
first be tilted down before its removal. Two
people are required to remove and install the
front bumper. Safely support the bumper and
To Next Page