PREVOST X3-45 2016 - Page 267

Section 13: WHEELS, HUBS & TIRES
PA1593
11
10. SPECIFICATIONS
STEEL WHEELS (except inner drive axle)
Wheel size .................................................................................................................................... 9.0" X 22.5"
Wheel nut torque ............................................................................................ 450 - 500 lbf-ft (610 - 680 Nm)
Tire size .................................................................................................................................... 315/80 R 22.5
STEEL WHEELS (inner drive axle)
Wheel size .................................................................................................................................. 8.25" X 22.5"
Wheel nut torque ............................................................................................ 450 - 500 lbf-ft (610 - 680 Nm)
Tire size .................................................................................................................................... 315/80 R 22.5
RECOMMENDED TIRE INFLATION PRESSURE AT MAXIMUM LOAD (cold)
NOTE
Vehicle is delivered with the specific inflation pressure certification plate according to the tire selection.
WARNING
Special tire selection may lower maximum allowable speed limit, even below posted speed limit. For
maximum safety, check with tire manufacturer.
WARNING
Recommended tire inflation pressures and maximum allowable loads apply to speeds up to 65 mph
(105 km/hr). Do not drive vehicle at a higher speed than 65 mph (105 km/h) or above the posted speed
limit.