Chapter 4 MAINT / MISC
190
Eject Function
Enables and defines the eject function to be used. When activated,
the function is used by holding down the VIEW/EJECT key for more
than one second in offline mode.
• Standard. Slews the paper two 11” pages when VIEW/EJECT
is pressed for more than one second. Pressing VIEW/EJECT a
second time retracts two pages.
• Simple Tear. Allows demand printing for specially designed
forms which require a header of at least 2.66 inches in height.
This leader prevents the paper from falling out of the tractors
when the demanded sheet is removed. Press the VIEW/EJECT
key. The printer slews the bottom of the last printed form to the
tear position. Tear the paper, then press the VIEW/EJECT
button again. The paper reverses the exact amount of paper it
slewed, placing the print position to the next available page.
See “Demand Printing” on page 247 for detailed information on
Simple Tear.
• Form Saver. Allows near demand printing for forms that do not
have pre-printed headers or special application designs. At
least one blank page is required to load the paper so that it
does not slip out of the tractors. For shorter form lengths, two or
more blank pages may be necessary. When you press VIEW/
EJECT, the bottom of the printed page is slewed to the tear
position. When pressed again, the paper moves to the top of
the next printable page available. See “Demand Printing” on
page 247 for detailed information on Form Saver.
• Disable. Prevents the use of the eject function.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...
