Optimizing Print Quality
85
Optimizing Print Quality
You can optimize print quality for darker and sharper barcodes and
characters. By doing so, however, the printer speed will decrease.
To optimize print quality, you can change the values of the following
configuration parameters:
• Bar Code Quality (Printer Control menu): Select “Dark” or
“Recommended.” Recommended prints the darkest images,
but at the slowest speed. Dark prints at a faster speed than
Recommended, but the characters are not as dark. (See page
87 for the Configuration Main Menu, and see page 215 for a
written description of Bar Code Quality.)
• Print Quality (IGP/PGL emulation): Select “Best” or “High.”
Best prints the darkest images, but at the slowest speed. High
prints at a faster speed than Best, but the characters are not as
dark. (See page 95 for the IGP/PGL Configuration Menu, and
see page 104 for a written description of Print Quality.)
• Print Quality (IGP/VGL emulation): Select “High.” (See page
109 for the IGP/VGL Configuration Menu, and see page 114 for
a written description of Print Quality.)
Optimizing Print Speed
LP+, IGP/PGL and IGP/VGL Emulations
The printer has been configured at the factory for optimal print
speed. To optimize print quality instead, you can change values for
specific configuration parameters such as Barcode Quality and
Print Quality. By doing so, however, the printer speed will decrease.
If you have optimized the printer for print quality, you can change it
back to optimal speed by selecting the factory default values as
follows:
• Bar Code Quality (Printer Control menu): Select “Draft.”
(See page 87 for the Configuration Main Menu, and see page
215 for a written description of Bar Code Quality.)
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...
