Printronix P5210 - Submenu

Submenu
95
IMPORTANT BEFORE you reconfigure the IGP/PGL, print a configuration
sheet to see all of the current settings.
Submenu
Define CR Code (Carriage Return)
This parameter forces the printer to insert an automatic Line Feed
code into the data stream whenever a Carriage Return code
occurs. This is to be used only if the host computer does not send
Line Feeds to the printer.
• CR = CR. Does not perform a line feed. The next print position
will be print position 1 of the current line.
• CR = CR + LF. Performs an automatic line feed. The next print
position will be print position 1 of the next line.
Barcode
Options
(from page 95)
UPC
Descenders
Optimized
Ratio
I-2/5
Selection
AI 00
Spaces
Select SO
Char
Always*
Never
Only with PDF
Disable*
Enable
Leading Zero*
Trailing Spaces
X2 DPD
Modulo 7 CD
Disable*
Enable
14*
(0-255)
* = Factory Default
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es