Chapter 4 MAINT / MISC
192
3. Press the combination of keys that you want to be the new lock
key. Make sure you press all keys selected at the same time.
4.
If the selection is valid, the display will read, “Enter the new lock
key again.” If the selection is invalid, the display will read,
“Invalid key selection.” Return to step 2 and start over.
5.
Press the same combination of keys a second time. If the new
lock key combination is entered again correctly, the display will
read, “Lock key has been changed.” If it was entered
incorrectly, the display will read “Verification failed.” Start over
at step 2.
6.
After entering the new lock combination successfully, press the
ON LINE key to put the printer back online.
NOTE: The new lock combination will remain even if the printer is
powered off and back on.
PTX SETUP Option
Selects the Special Function Control Code for the PTX_SETUP
command and functions.
• Setup Parse. Disables or enables the PTX_SETUP command.
• Setup SFCC. Allows you to choose the hex value of the ASCII
character you wish to use as the SFCC for the PTX_SETUP
command. Valid hex values are 01-FF. The default value is hex
21, which corresponds to the “!” character.
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...
