Menu
191
Power Stacker
This parameter allows you to enable or disable the power paper
stacker (provided this option is installed).
Auto Elevator
This parameter only exists on printers with the power paper stacker
installed. The power stacker has a sensor which detects paper
movement and raises the stacker as the printed paper stack grows.
If the printer has been printing for three minutes continually and the
sensor has not detected any growth in the paper stack, the stacker
raises itself 1/4 inch automatically.
• Enable. The automatic elevator on the power stacker operates
normally.
• Disable. For use with extremely high-quality print jobs that take
a long time to print. The stacker does not raise automatically
every three minutes, and is entirely dependent on the sensor.
Auto Locking
• Disable. The ENTER key must be locked manually.
• Enable. The printer automatically locks the ENTER key five
minutes after the last front panel key press.
Set Lock Key
Normally, to lock or unlock the printer menu, the UP and DOWN
keys are pressed at the same time. The Set Lock Key parameter
lets you choose different keys to lock or unlock the printer menu.
You may choose almost any group of keys as the new lock and
unlock keys. You cannot use the ENTER key or any key
combinations which are already used for another function. There is
no limit to how many keys can be selected.
To set the new lock key, follow these steps:
1. Work your way through the configuration menu until the display
reads “Set Lock Key” (follow the menu structure on page 188).
2. Press ENTER. The display reads, “Select a new lock key.”
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
To Next Page
Loading...
