USER’S MANUAL. PRODIG-5
Page 24 11/2006
Skin Sets the screen background colour.
Light Sensor It activates a light sensor to automatically adjust the
display contrast and brightness. Options are: High
contrast (with low luminosity), Low contrast (with high
luminosity) and AUTO.
Ter. Identify Selects the type of terrestrial digital signal, DVB-C or
DVB-T used by AUTO-ID and EXPLORER functions.
Min. Ter. Power Minimum level of digital signal to display. (Between 0.0
dBµV and 130.0 dBµV)
Min. Ter. Level Minimum level of analogue signal to display. (Between
0.0 dBµV and 130.0 dBµV).
Min. Sat. Power Minimum level of digital signal to display.
C/N Defines the C/N measuring method between Auto or
Reference Noise (Manual), used to determine the
frequency where noise level will be measured in the
spectrum analyser mode.
Identify Timeout Sets the maximum time that the equipment will carry
out the identification of a channel unknown before
going to the next one.
Sat Band (Only satellite band).
Selects the C-band or Ku-band for tuning satellite
signals.
Auto Power Off Activates the automatic power off mode.
Time Power Off Select the power off timeout between 1 and 120
minutes.
Units Select the measurements units: dBµV, dBmV or dBm.
Rotary Selector Select the movement sense: CW (clockwise) or CCW
(counterclockwise).
Exit Exit from preferences menu
Key number 8 to enter numeric data.
To Next Page
Loading...
