USER’S MANUAL. PRODIG-5
11/2006 Page 63
English
When a digital channel is decodified, once the Table of Services SDT (Service
Description Table) acquisition is completed, is possible to accede to the list of
services contained in the Table.
For it place the field selector, by means of the vertical cursors
[6], on the
field of the active service (e.g. Veo TV in the following figure) and later press the rotary
selector [1].
The DIGITAL SERVICES menu will appear then with the services available in the
digital Multiplex. Move the vertical cursors
[6] or turn the rotary selector [1] and
press it to select the service to visualise on screen.
DTV
(FREE)
VPID:
PID:
101
103
MP@ML
720x576i
4:3 50 Hz
Component
CHANNEL:
CCIR
DVB-T
66
834.00 MHz
100
12289
VISTA TV
NETW.: VistaNetw
VIDEO:
AUDIO:
3999
192
kbit/s
kbit/s
MPEG-2
MPEG-1 L-2
SID:
NID:
- -
OSD: ON
DIGITAL SERVICES
24H TVE-RTVE
CLAN/50 TVE-R
RTVE 1-RTVE
RNEC-RTVE
TVE 1-RTVE
TVE 2-RTVE
(*)Canal Ingenier
EXIT
VISTA TV
Figure 38.- Digital channel monitoring. Digital services.
Also is possible to change the active service directly acting through the horizontal
cursors
[6] once has selected the field of the service from information window of
the currently tuned channel.
5.17 Antenna Alignment Function
It allows executing the function Antenna Alignment to align antennas using a
faster sweep without display of numerical measures. The display appears divided in two
parts, the left one shows the spectrum of the signals detected in the band and on the
right two analogue bars represents the level of signal corresponding to the tuned
frequency or channel. The left bar shows the peak value with a certain persistence. The
right bar shows a filtered average value.
To Next Page
Loading...
Need help?
General
