USER’S MANUAL. PRODIG-5
Page 26 11/2006
Figure 5.- Top panel view.
[30] RF
RF signal input
Maximum level 130 dBµV. Universal connector for F/F or F/BNC adapter, with
input impedance of 75 Ω.
ATTENTION
Use the 10 dB attenuator (AT-010) to protect the RF [30] input
whenever the input signal level is greater than 130 dB
µ
V (1 V) or when
suspecting of intermodulation problems.
This accessory allows DC voltages to pass when powering external units as
LNB and amplifiers.
To Next Page
Loading...
