USER’S MANUAL. PRODIG-5
11/2006 Page 3
English
To enhance its convenience of use, it includes memories to store automatically
the different data acquisitions, i.e.: acquisition name, test points, frequency, channel
plan, etc.,. Moreover, the DATALOGGER function makes it much easier to test systems
in which a large number of measurements have to be made, and enables further
processing of all the information acquired using a computer system.
Also, this meter incorporates a DiSEqC
2
command generator and permits to
supply different voltages to the external unit (5 V / 13 V / 15 V / 18 V / 24 V) and
includes an EUROCONNECTOR, or Scart connector, for audio/video input/output.
The PRODIG-5 is powered by rechargeable battery or connected to the mains
through the supplied external DC power charger.
It incorporates a RS-232C interface, which enables service to be carried out, and
the checking, setup and calibration processes.
This instrument due to its extreme-compact design, technical specifications and
low cost becomes the industry standard for the installer.
2
DiSEqC
TM
is a trademark of EUTELSAT.
To Next Page
Loading...
Need help?
General
