ProMinent gamma/ X - Troubleshooting Guide; Diagnosing Faults Without Error Messages

Modul
e/slot
Index Name Modul
e
name
Diag.
numbe
r
Identi‐
fication
(hex)
Type Data‐
flow *
Description
2 Batch When triggered,
the pump is
metering the
volumes set in
the batch code
3 Con‐
tact
Pump meters
volumes in the
predefined time
4 Ana‐
logue
Pump is
metering in
accordance with
the analogue
signal and the
analogue mode
set at the pump.
17 Manua
l (con‐
centr.)
Manual in con‐
centration mode
18 Batch
(con‐
centr.)
Batch in con‐
centration mode
19 Con‐
tact
(con‐
centr.)
Contact in con‐
centration mode
20 Ana‐
logue
(con‐
centr.)
Analogue in
concentration
mode
4 1 nom‐
inal
flow
rate
Flow
rate
6 C0,83,
83
f32 S Metering capacity setpoint in
litres / hour
2 Actual
flow
rate
7 f32 R Metering capacity actual value
5 1 max.
flow
rate
Max.
flow
rate
8 40.83 f32 R Maximum metering capacity in
litres / hour
6 1 Batch
volume
Batch 9 C0,83,
88
f32 S Batch metering volumes
2 Batch
time
10 u16 Time in which the batch should be
metered
3 Batch
start
11 u8 If the value changes from 1 to 0, a
batch metering is activated in
batch mode. (Batches may also
be activated via contact input.)
Supplementary Operating Instructions PROFIBUS
®
73