Item Name Status "0" Status "1"
2
14
Calibration Pump not calibrated Pump calibrated
2
15
Operation Manual mode BUS mode
Tab. 42: Fault
Item Fault
2
0
Minimum (storage empty)
2
1
Fault analogue current
2
2
-
2
3
-
2
4
Diaphragm rupture (option)
2
5
Metering monitoring (option)
2
6
Overflow stroke storage
2
7
System fault
Tab. 43: Warning
Item Warning
2
0
Minimum (storage empty)
2
1
Stroke length adjustment beyond tolerance
2
2
Diaphragm rupture (option)
2
3
-
2
4
-
2
5
-
2
6
-
2
7
-
In conformity with PROFIBUS
®
standard, the device makes the
[Get_Sl_Diag]
service available. The diagnostics data comprise
standard diagnostics information (6-Bytes according to PRO‐
FIBUS
®
standard) and any possible diagnostics data specific to the
device. A maximum of 63 bytes can be inserted for the device-spe‐
cific diagnostics data. The first 4 bytes in the PROFIBUS
®
standard
are specified from this:
Encode the byte sign_len as follows:
Length of the DU status including the header byte: 04..63
Flags ‘device-related diagnostics’: 00 constant
Diagnostics frame
Supplementary Operating Instructions PROFIBUS
®
83
To Next Page
Loading...
