GTR-3455
Doc Ref: Page: 11
Date: 13/01/13 Issue: H
Pr
seal
®
uk
Tray Sealing Solutions
1.9 GTR Control Panel
The following operator interfaces are provided to allow quick and simple operation of the GTR
Button Function
Reset Used to reset the emergency stop circuit.
Emergency Stop Used in the event of an emergency where immediate stopping of the machine is
required. When pressed the safety circuit becomes de-energised and power is
removed from the air supply dump valve and head down isolation valve.
Guard Lamp Guard circuit ok indication, illuminated when ok.
Seal
Temperature
Adjustable temperature controller for the sealing tool.
Manual Film
Feed
A Black button to feed the film on manually.
Seal Timer Adjustable timer controlling the amount of time the sealing head stays in the
down position.
Film Feed Timer Adjustable film feed timer, which controls the length of film during automatic
operation.
Plain /
Registration
A plain / registration switch is fitted to the machine enabling the operator to
switch from plain film to printed film.
Gas Off / On
(Optional)
A Gas Off / On switch is fitted to the machine enabling the operator to switch
from atmospheric sealed trays to gas flushed sealed trays.
Gas Time
(Optional)
Adjustable timer controlling the amount of time gas is flushed into the tray prior
to completion of the sealing operation.
Mains Isolator
Switch
Electrically isolates the machine. Switch to 1 to supply power and 0 to isolate
the power supply.
Note: The machine may be supplied with a 3 position gas selector switch to include
gas flushing of board lids (“Gas Knife” option).
To Next Page
Loading...