GTR-3455
Doc Ref: Page: 6
Date: 13/01/13 Issue: H
Pr
seal
®
uk
Tray Sealing Solutions
1.2 Components
All Proseal machines are constructed using components which are safe to use in the food
processing environment.
Below is a list of typical components used in the construction of a Proseal machine:
• Roller Bearings
All roller bearings are stainless steel specification. Some have plastic housings which are resistant
to corrosion and inert to cleaning agents.
• Polymer Bearings
Polymer bearings are also used in Proseal machines. They do not require any lubrication and have
good chemical resistance to diluted cleaning agents which may be used to clean the machine.
• Conveyor Belts
All conveyor belts used on Proseal machines are FDA approved and are of a hygienic design to
reduce the chance of product contamination.
• Electrical Components
All electrical components which are exposed to possible water ingress due to their location are
specified to a minimum IP65 rating. This ensures that they can be carefully cleaned by hand, in-
situ. Components in the working area of the machine may be protected by covers to reduce their
exposure water ingress during cleaning. All other components are located in sealed stainless steel
enclosures.
• Pneumatic Components
All pneumatic components pipes and fittings are industry standard which are designed to withstand
the normal wash down procedures associated with Proseal machinery.
To Next Page
Loading...