GTR-3455
Doc Ref: Page: 43
Date: 13/01/13 Issue: H
Pr
seal
®
uk
Tray Sealing Solutions
7. CONFIGURATION
7.1 Important
Configuration of the GTR requires specialist knowledge of the system and should only be
performed by ProSeal engineers, suitably trained maintenance staff or authorised personnel.
Any work carried out by non-authorised personnel may invalidate any warranty provided.
7.2 Scope
This section is intended to aid engineers when commissioning the system or when performing
maintenance activities that involve replacing key components.
7.3 Recommended Reading
Prior to carrying out any work it is recommended that the relevant personnel have read and
understood the following manuals
a) Fr-D700 Mitsubishi Transistorised inverter instruction manual
b) Mitsubishi FX series FX1s PLC programming manual
c) Electroserve Temperature controller product manual
e) ProSeal UK Ltd. Operation and maintenance manual.
A copy of these manuals can be obtained from ProSeal UK Ltd. Alternatively copies can be found
in the product manual filing cabinet.
To Next Page
Loading...