ProSeal GTR - Declaration of Conformity

Serial No
:
GTR-3455
Doc Ref: Page: 45
Date: 13/01/13 Issue: H
Pr
seal
®
uk
Tray Sealing Solutions
8. DECLARATION OF CONFORMITY
The Proseal GTR machine has been designed in accordance with, and satisfies the
requirements of the Machinery Directive 2006/42/EC by use of the following harmonised
standards:
Machinery Directive 2006/42/EC replaces 98/37/EC
BS EN ISO 12100:2010 Safety of Machinery - General principles for design- Risk assessment and risk
reduction.
BS EN 13857:2008 Safety of Machinery - Safety distances to prevent hazard zones being reached by
upper and lower limbs.
BS EN 349:1993+A1:2008 Safety of Machinery - Minimum gaps to avoid crushing of parts of the human
body.
BS EN 415-1:2014+A1:2009 Packaging machines safety - Part 1.
BS EN 415-3:1999+A1:2009 Packaging machines safety - Part 3.
BS EN 415-7:2006+A1:2008 Packaging machines safety – Part 7.
BS EN 619:2002+A1:2010 Continuous handling equipment and systems. Safety and EMC requirements
for equipment for mechanical handling of unit loads.
BS EN ISO 13850:2015 Safety of machinery - Emergency stop - Principles for design.
EN ISO 13732-1:2008 Safety of machinery -Temperatures of touchable surfaces.
BS EN ISO 14120:2015 Safety of machinery – Guards – General requirements of fixed and movable
guards.
BS EN ISO 13849:2015 replaces Safety of machinery – Guards – Safety related parts of control systems.
BS EN ISO 4414:2010 Pneumatic fluid power- General rules and safety requirements for systems and
their components.
BS EN ISO 13855:2010 Safety of machinery – The positioning of safeguards with respect of approach
speeds of parts of the human body.
BS EN 1037:1995+A1:2008 Safety of machinery – Prevention of unexpected start up.
BS EN ISO 14119:2013 Safety of machinery – Interlocking devices associated with guards. Principles for
design and selection.
Low Voltage Directive 2006/95/EC replaces 72/23/EEC
BS EN 60204-1:2006+A1:2009 Safety of machinery – Electrical equipment of machines.
EMC Directive 2004/108/EC replaces 89/336/EEC
BS EN 6100-4-6:2014 Electromagnetic compatibility (EMC)
The Technical Construction File is available at: Proseal uk Ltd, Adlington Industrial Estate,
Adlington, Cheshire, SK10 4NL.