GTR-3455
Doc Ref: Page: 17
Date: 13/01/13 Issue: H
Pr
seal
®
uk
Tray Sealing Solutions
6. Follow the film path as shown in the film feed diagram.
7. Ensure the waste release knob is pushed in and rotated to its locked position.
8. Wrap excess film around the rewind shaft.
8. Press the manual film feed button to feed more film and ensure it is tight on the rewind shaft.
9. Check the film runs true and central to the sealing head.
10. The machine is now ready for production.
Rewind Shaft Release Knob
To Next Page
Loading...