Category Item
Tools • Phillips #1 or #2 screwdriver
• Flat head screwdriver
• Anti-static wrist strap
Setting Up the Device
Important
Read all safety requirements and information carefully before setting up the device or
installing device components.
1. Place your device in an environment that meets the requirements.
For details, see Installation Requirements.
2. Install drives.
For details, see the following topics:
• Installing 2.5-Inch Drives
• Installing M.2 Solid-State Drives on the QGD-1602P
3. Optional: Install expansion cards.
For details, see Installing Expansion Cards.
4. Optional: Connect expansion units.
For details, see Connecting USB Expansion Units.
5. Connect the power cord and all applicable cables.
6. Power on the device.
7. Install QTS.
For details, see QTS Installation.
8. Log on to QTS.
QGD Rackmount Switch User Guide
Product Overview 16