8. Optional: Install an additional M.2 SSD.
9. Attach the case cover.
For details, see Attaching the Case Cover.
10. Connect all cables and external attachments.
11. Connect the power cord to the electrical outlet.
12. Power on the device.
Replacing Memory Modules
The device has two memory slots. The QGD-1600P-4G, QGD-1602P-C3558-8G, and QGD-1602P-C3758-16G
come pre-installed with one memory module, while the QGD-1600P-8G has two pre-installed memory
modules.
You can increase the memory capacity of the device by upgrading the memory modules. When using two
modules, use only QNAP modules of the same type and capacity to maintain system performance and
stability. You can purchase QNAP memory modules from authorized resellers.
Warning
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
QGD Rackmount Switch User Guide
Installation and Conguration 25
To Next Page
Loading...
Need help?
General
