5. Press and hold Select.
The panel displays the system fan speed.
Powering O the Switch
1. Press Enter or Select.
The panel displays the device name and QTS version.
2. Press and hold Enter for two seconds.
The panel displays Main Menu 1. TCP/IP.
3. Press Enter repeatedly until the panel displays Main Menu 5. Shut down.
4. Press and hold Enter.
The device powers o.
Restarting the Device
1. Press Enter or Select.
The panel displays the device name and QTS version.
2. Press and hold Enter for two seconds.
The panel displays Main Menu 1. TCP/IP.
3. Press Enter repeatedly until the panel displays Main Menu 6. Reboot.
4. Press and hold Enter.
The device restarts.
Changing the LCD Password
Specifying a password for the LCD panel prevents unauthorized access.
1. Press Enter or Select.
The panel displays the device name and QTS version.
2. Press and hold Enter for two seconds.
The panel displays Main Menu 1. TCP/IP.
3. Press Enter repeatedly until the panel displays Main Menu 7. Password.
4. Press and hold Enter.
The Change Password screen appears.
5. Select Yes by pressing and holding Enter.
The New Password screen appears.
6. Press Select and Enter to specify a new password.
• Specify a password.
• Length: 1-8 characters
• Valid characters: 0-9
• To delete a password, leave the password eld blank.
• Move the cursor to OK.
QGD Rackmount Switch User Guide
Basic Operations 56
To Next Page
Loading...
Need help?
General
