QNAP QGD-1602P User Manual

Network Management
Basic network conguration of the switch includes port management, VLAN conguration, conguration of
various protocols, and trac management via Quality of Service (QoS) and Access Control Lists (ACLs).
Dashboard
The dashboard opens to the conguration section of the interface. Click the drop-down menu in the
dashboard to view the port status, VLAN status, link aggregation status, and port trac for all ports.
You can also delete user-congured network settings and monitor the network settings of the switch.
Conguring Port Settings
1. Log in to QSS, or open QuNetSwitch in QTS.
2. Go to Conguration > Port Management .
3. Go to Port Conguration.
4. Identify a port.
5. Congure the settings.
Setting Description
State Controls the operation status for a port
Speed Species the maximum speed at which a port can operate
Flow Control Controls the ow control status for a port
Important
Flow Control is not supported when the port speed is
set to HDX.
Maximum Frame Size Controls the maximum frame size allowed for the port
6. Click Apply.
QSS or QuNetSwitch saves the settings.
Managing PoE Settings
Power over Ethernet (PoE) systems pass electric power along Ethernet cables, and allow a single cable to
provide both a data connection and electric power to devices such as wireless access points, cameras, or
VoIP phones.
The PoE screen displays information about PoE power consumption and provides access to PoE scheduling
and conguration options.
Conguring PoE Settings
1. Log in to QSS, or open QuNetSwitch in QTS.
2. Go to Conguration > PoE .
3. Go to Power Conguration.
4. Identify a port.
QGD Rackmount Switch User Guide
Switch Management 62

QNAP QGD-1602P Specifications

General

Brand	QNAP
Model	QGD-1602P
Category	Switch
Language	English