QGD-1602P
7. Attach the case cover.
For details, see Attaching the Case Cover.
8. Connect all cables and external attachments.
9. Connect the power cord to the electrical outlet.
10. Power on the device.
Installing Expansion Cards
The device supports selected expansion cards, some of which require QNAP PCIe brackets. QNAP-branded
expansion cards purchased from the company website are shipped with the brackets necessary to t the
device.
For details on supported expansion cards and brackets, go to http://www.qnap.com/compatibility.
Warning
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Power o the device.
QGD Rackmount Switch User Guide
Installation and Conguration 29
To Next Page
Loading...
Need help?
General
