QNAP QGD-1602P User Manual

11. Connect the power cord to the electrical outlet.
12. Power on the device.
Connecting the Device to a Computer or Network
The device can be connected to a computer or local area network.
Connecting the Device to a Computer
Connecting the device to a QNAP NAS allows you to expand storage capacity and backup data to another
NAS through Ethernet cable connections to a PoE port on the device. However, you must connect the device
to a computer to congure the device settings.
1. Power on the device.
2. Connect the device to a computer.
a. Connect an Ethernet cable to a PoE port on the device.
b. Connect the Ethernet cable to a Gigabit Ethernet port on the computer.
3. Verify that the device is recognized by the computer.
a. Open Qnder Pro on the host computer.
Note
To download Qnder Pro, go to https://www.qnap.com/utilities.
b. Locate the device on the list.
Connecting the Device to a Network
The device can connect to the local area network through the host port or a PoE port.
1. Power on the device.
QGD Rackmount Switch User Guide
Installation and Conguration 41

QNAP QGD-1602P Specifications

General

Brand	QNAP
Model	QGD-1602P
Category	Switch
Language	English