QNAP QGD-1602P User Manual

For details, see Removing the Case Cover.
5. Remove the fan module.
a. Detach the fan's power connector from the system board.
b. Remove the screws that secure the fan module to the chassis.
c. Lift the fan module from the chassis.
6. Remove the fan.
a. Remove the screws that secure the fan to the fan module.
b. Remove the fan from the fan module.
7. Install a new fan.
QGD Rackmount Switch User Guide
Installation and Conguration 39

QNAP QGD-1602P Specifications

General

Brand	QNAP
Model	QGD-1602P
Category	Switch
Language	English