3. To print the stamp, insert the mail piece into the base against the rear-guide wall,
with the side to be printed facing upwards.
If you want to seal the envelope, first engage the flap into the
moistener (option). Do not try to moisten self-adhesive envelopes.
4. The Mailing System applies postage and the mail piece is ejected.
5. Repeat the previous step for each piece of mail.
To quit the process at any time, press .
When you remove the last object from the Weighing Platform,
the Mailing System will ask if you want to print it. You can
answer Yes or No.
40
| Page 40 | Apr-28-2023 03:14 |
3
Processing Mail
To Next Page
Loading...
