QuadTech Guardian 2500 Series User Manual

Operation/Programming Page 61 of 61
If Enhanced Features is set for On, press right arrow key to select Clear All Tests.
If Enhanced Features is set for Off, press up/down arrow key to select On and press
right arrow key to select Clear All Tests.
Press up down arrow keys to select Clear All Tests, No or Yes
Press UTILITY key to exit or right arrow key to continue with Clear All Tests.
Press down arrow keys to select Clear All Tests, No or Yes.
Press UTILITY key to exit or right arrow key to continue with Clear All Tests if Yes
was selected. All tests would be reset to factory default (most with no programs stored)
with the following message displayed momentarily.
Press the UTILITY key to exit or move to other Enhanced Features with the right
arrow key.
Clear All Tests Util
No
Clear All Tests Util
Yes
Clear All Tests Util
Are You Sure? No
Clear All Tests Util
Are You Sure? Yes
Test restored from
defaults correctly.

QuadTech Guardian 2500 Series Specifications

General

Brand	QuadTech
Model	Guardian 2500 Series
Category	Test Equipment
Language	English