Q40 Tape Library Installation and Operations Manual
511026 Rev. 07-01-19 14
2.2 Supported Tape Drives
The Q40 was developed to integrate industry-standard LTO Ultrium tape drives. Mixed drive generations
and mixed interfaces are supported within a single library and within a single module.
Listed below in Table 2 are the tape drives that have been tested and implemented in the Q40.
T
able 2: Supported Tape Drives
LTO Drives
LTO-6 Half-Height FC Single Port
LTO-6 Half-Height FC Dual Port
LTO-6 Half-Height SAS Dual Port
LTO-7 Half-Height FC Single Port
LTO-7 Half-Height FC Dual Port
LTO-7 Half-Height SAS Dual Port
LTO-8 Half-Height FC Single Port
LTO-8 Half-Height FC Dual Port
LTO-8 Half-Height SAS Dual Port
To Next Page
Loading...
