Qualstar Q40 - Page 75

511026 Rev. 07-01-19
75
• Library Time & Date – helpful when analyzing event logs and support tickets, and might be needed
when contacting support.
• User – The user account for this session.
• Logout – Logs out of this session.
• ? -– Accesses online help.
6.1.2 Left Pane Elements
• Library Status – Overall library status
• Serial # – The Base Module serial number
• Hostname – The library hostname
• Network Configuration – The IP version (IPv4 or IPv6) and IP address
• Firmware – The library firmware version
• Module Status Overview – A summary of each module’s configuration and health. Click the module
s
tatus area to select the module.
• Module Health Icon
• The green check mark icon indicates that the module is fully operational and that no
us
er intervention is required.
• The yellow triangle explanation point icon indicates that user attention is necessary,
but that the library can still perform most operations.
• The red circle X icon indicates that user intervention is required and the module is not
capable of performing some operations.
• Module Number – Modules are numbered based on their location in the physical library. The
bot
tom module is Module 1. The Base Module is annotated with (Base).
• Drive Status – The number of drives installed in each module and the health of each drive.
Click on the drive to display drive configuration and status information in the center pane.
• A black square indicates that the drive is fully operational and that no user
intervention is required.
• A yellow square indicates that user attention is necessary, but that the drive can still
perform most operations.
• A red square indicates that user intervention is required or the drive is not capable of
performing some operations.
• Magazine Slot Usage – The number of cartridge slots available and the number in use.
• Drive Operation Status – The current drive activity for each drive in the module. The drive
operation status is only displayed for the selected module.
• Write – The drive is performing a write operation.
• Read – The drive is performing a read operation.
• Idle – A cartridge is in the drive but the drive is not performing an operation.
• Empty – The drive is empty.
• Encryp – The drive is writing encrypted data.