511026 Rev. 07-01-19
9
HAZARD
• Risk of hand pinching, can trap hands, fingers and cause
s
erious injury. Keep hands clear during operation.
Risk of personal injury
Before lifting a library:
• Observe local health and safety requirements and guidelines
for manual material handling.
• Remove all tapes to reduce the weight.
• Remove all tape drives to reduce the weight.
• Obtain adequate assistance to lift and stabilize the library
during installation or removal.
Risk of damage to devices
When placing a library into or removing the library from a rack:
• Extend the rack’s levelling jacks to the floor.
• Ensure that the full weight of the rack rests on the levelling
jacks.
• Install stabilizing feet on the rack.
• Extend only one rack component at a time.
Risk of damage to devices
• A discharge of static electricity damages static-sensitive
dev
ices or micro circuitry.
• Proper packaging and grounding techniques are necessary
precautions to prevent damage.
• Ventilation – Place the product in a location that does not interfere
with proper ventilation.
• Heat – Place the product in a location away from heat sources.
• Power sources – Connect the product to a power source only of t
he
t
ype directed in the operating instructions or as marked on t
he
product.
• Power cord protection – Place the AC line cord so that it is not
possible to be walked on or pinched by items placed upon or
against it.
• Object and liquid entry – Insure that objects do not fall onto and tha
t
l
iquids are not spilled into the product’s enclosure.
To Next Page
Loading...
