Quanta Computer QuantaMesh - Page 119

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
119
5.2.6.7 ip igmp snooping mrouter interface
The user can go to the CLI Interface Configuration Mode to configure the interface as a multicast
router-attached interface or configure the VLAN ID for the VLAN that has the multicast router attached
mode enabled, use the ip igmp snooping mrouter interface|<vlaniid> interface configuration
command. Use the no ip igmp snooping mrouter interface|<vlan-id> disable multicast router
attached mode for the interface or a VLAN.
Syntax
ip igmp snooping mrouter interface|<vlan-id>
no ip igmp snooping mrouter interface|<vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
Default Setting
None
Command Mode
Interface Config
5.2.6.8 set igmp
The user can go to the CLI VLAN database Mode to set IGMP Snooping on a particular VLAN, use the
set ipgm <vlan-id> vlan configuration command. Use the no set igmp <vlan-id> to disable IGMP
Snooping on a particular VLAN.
Syntax
set igmp <vlan-id>
no set igmp <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
Default Setting
Disabled
Command Mode
VLAN database