Quanta Computer QuantaMesh - Page 120

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
120
5.2.6.9 set igmp fast-leave
The user can go to the CLI VLAN Configuration Mode to set IGMP Snooping fast-leave admin mode on
a particular VLAN, use the set igmp fast-leave <vlan-id> vlan configuration command. Use the no set
igmp fast-leave <vlan-id> disable IGMP Snooping fast-leave admin mode.
Syntax
set igmp fast-leave <vlan-id>
no set igmp fast-leave <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
Default Setting
Disabled
Command Mode
VLAN database