Quanta Computer QuantaMesh - Page 122

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
122
5.2.6.12 set igmp mcrtrexpiretime
The user can go to the CLI Interface VLAN Configuration Mode to set the Multicast Router Present
Expiration time on a particular VLAN, use the set igmp mcrtrexpiretime <vlan-id> <0-3600> vlan
configuration command. Use the no set igmp mcrtrexpiretime <vlan-id> to return to default value 0.
Syntax
set igmp mcrtrexpiretime <vlan-id> <0-3600>
no set igmp mcrtrexpiretime <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
<0-3600> - The range of the Multicat Router Present Expire time is 0 to 3600 seconds
Default Setting
0
Command Mode
VLAN database
5.2.6.13 set igmp report-suppression
The user can go to the CLI VLAN Configuration Mode to set IGMP Snooping report-suppression admin
mode on a particular VLAN, use the set igmp report-suppression <vlan-id> vlan configuration
command. Use the no set igmp report-suppression <vlan-id> disable IGMP Snooping
report-suppression admin mode.
Syntax
set igmp report-suppression <vlan-id>
no set igmp report-suppression <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
Default Setting
Disable
Command Mode
VLAN database