Quanta Computer QuantaMesh - Page 123

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
123
5.2.6.14 set snoop-vlan-block
The user can go to the CLI VLAN Configuration Mode to set IGMP/MLD Snooping snoop-vlan-block
admin mode on a particular VLAN, use the set snoop-vlan-block <vlan-id> vlan configuration
command. Use the no set snoop-vlan-block <vlan-id> disable IGMP Snooping snoop-vlan-block
admin mode.
Syntax
set snoop-vlan-block <vlan-id>
no set snoop-vlan-block <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
Default Setting
Disable
Command Mode
VLAN database
5.2.6.15 ip igmp snooping static
The user can go to the Global Mode and add a port to multicast group, use the ip igmp snooping static
Global command. The MAC address of the L2Mcast Group in the format 01:00:5e:xx:xx:xx.
Syntax
ip igmp snooping static <macaddr> vlan <vlan-id> interface {<slot/port> | port-channel
<portchannel-id>}
no ip igmp snooping static <macaddr> vlan <vlan-id> interface {<slot/port> | port-channel
<portchannel-id>}
<vlan-id> - VLAN ID (Range: 1 – 4093).
<macaddr> - Static MAC address.
<slot/port> - Interface number.
<portchannel-id> - Port-channel interface number. The range of port-channel ID is 1 to 64.
Default Setting
None
Command Mode
Global Config