Quanta Computer QuantaMesh - Page 168

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
168
5.2.10.7 port-channel system priority
This command defines a system priority for the port-channel (LAG).
Syntax
port-channel system priority <priority-value>
<priority-value> - valid value 0-65535.
Default Setting
32768
Command Mode
Global Config
5.2.10.8 adminmode
This command enables a port-channel (LAG) members. The interface is a ID for a configured
port-channel.
Syntax
adminmode
no adminmode
no - This command disables a configured port-channel (LAG).
Default Setting
Enabled
Command Mode
Interface Config