Quanta Computer QuantaMesh - Page 222

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
222
Syntax
snmp-server community-group <community-string> <group-name> [ipaddress <ip-address>]
<community-string> - The community which is created and then associated with the group. The
range is 1 to 20 characters.
<group-name> - The name of the group that the community is associated with. The range is 1 to 30
characters.
<ip-address> - Optionally, the IPv4 address that the community may be accessed from.
Default Setting
None
Command Mode
Global Config
5.3.5.7 show snmp engineid
This command displays the currently configured SNMP engineID.
Syntax
show snmp engineid
Default Setting
None
Command Mode
Privileged Exec
Display Message
Local SNMP EngineID: The current configuration of the displayed SNMP engineID.