Quanta Computer QuantaMesh - Page 223

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
223
5.3.5.8 snmp-server engineID
This command configures snmp engineID on the local device.
Changing the engineID will invalidate all SNMP configuration that exists on the box.
Syntax
snmp-server engineID local {<engine-id> | default}
no snmp-server engineID remote <ipAddr|ipv6Addr> <engineid-string>
<engine-id> - A hexadecimal string identifying the engine-id. Engine-id must be an even length in
the range of 6 to 32 hexadecimal characters.
default - Sets the engine-id to the default string, based on the device MAC address.
no - This command removes snmp engineID.
Default Setting
The engineID is configured automatically, based on the device MAC address.
Command Mode
Global Config
5.3.5.9 show snmp filters
This command displays the configured filters used when sending traps.
Syntax
show snmp filters [<filter-name>]
Default Setting
None
Command Mode
Privileged Exec
Display Message
Name: The filter name for this entry.
OID Tree: The OID tree this entry will include or exclude.
Type: Indicates if this entry includes or excludes the OID Tree.
i