Quanta Computer QuantaMesh - Page 286

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
286
5.4.1.6 show spanning-tree brief
This command displays spanning tree settings for the bridge. In this case, the following details are
displayed.
Syntax
show spanning-tree brief
Default Setting
None
Command Mode
Privileged Exec
Display Message
Bridge Priority: Configured value.
Bridge Identifier: The bridge ID of current Spanning Tree.
Bridge Max Age: Configured value.
Bridge Max Hops: Configured value.
Bridge Hello Time: Configured value.
Bridge Forward Delay: Configured value.
Bridge Hold Time: Minimum time between transmission of Configuration Bridge Protocol Data Units
(BPDUs).