Quanta Computer QuantaMesh - Page 320

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
320
This command is used to configure the password the switch uses to authenticate with the SMTP server.
Syntax
password {0 | 7} <password>
<0> - Passowrd should be 1 to 32 characters in plain text format.
<1> - Passowrd must be 64 characters in encrypted form.
no - This command resets the password to the default value. The default password is admin.
Default Setting
admin
Command Mode
Mail-Server Config