Privileged Exec
Display Message
Is configuration source selected: Is any interface configured configuration source or not.
Configuration source port: Which interfaces are configured as configuration source.
Interface: Specifies all the ports on which DCBX can be configured.
Status: Specifies the DCBX status of the interfaces.
Role: Specifies the DCBX role on the interfaces.
Version: Specifies the DCBX version on the interfaces.
DCBX Tx: Total number of transmitted DCBX TLV(s) on the interfaces.
DCBX Rx: Total number of received DCBX TLV(s) on the interfaces.
DCBX Error: Total number of error DCBX TLV(s) on the interfaces.
uknown TLV: Total number of unknown DCBX TLV(s) on the interfaces.
DCBX operational status: Specifies the DCBX status of the interface.
Configured DCBX version: Specifies the DCBX version on this interface.
Peer DCBX version: Specifies the DCBX version of the peer device.
Peer MAC: Specifies the MAC address of the peer device.
Peer Description: Specifies the description of the peer device.
Auto-configuration Port Role: Specifies the DCBX role on this interface.
Peer Is configuration Source: Is peer device configured configuration source or not.
Error counters: Total number of error DCBX TLV(s) on this interface as following.
ETS incompatible configuration: Total number of ETS incompatible configuration on this interface.
PFC incompatible configuration: Total number of PFC incompatible configuration on this
interface.
Disappearing neighbor: Total number of Disappearing neighbor on this interface.
Multiple neighbors detected: Total number of Multiple neighbors detected on this interface.
To Next Page
Loading...