Quanta Computer QuantaMesh - Page 89

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
89
5.2.3.12 vlan association subnet
This command removes the association of a MAC address to a VLAN.
Syntax
vlan association subnet <ipaddr> <netmask> <vlan-id> [<priority>]
no vlan association subnet <ipaddr> <netmask>
<ipaddr> - The IP address.
<netmask> - The subnet mask.
<vland-id> - VLAN identification number. ID range is 1-4093.
<priority> - The priority value for untagged frames received. Valid priority value is 0 to 7.
no - This command removes association of a specific IP-subnet to a VLAN.
Default Setting
None
Command Mode
VLAN database
5.2.3.13 vlan makestatic
This command changes a dynamically created VLAN (one that is created by GVRP registration) to a
static VLAN (one that is permanently configured and defined). The ID is a valid VLAN identification
number. VLAN range is 2-4093.
Syntax
vlan makestatic <vlan-id>
<vlan-id> - VLAN ID (Range: 2 –4093).
Default Setting
None
Command Mode
VLAN database