Quanta Computer QuantaMesh - Page 90

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
QuantaMesh | Switching Commands
90
5.2.3.14 protocol group
This command attaches a <vlan-id> to the protocol-based VLAN identified by <group-name>. A group
may only be associated with one VLAN at a time, however the VLAN association can be changed.
Syntax
protocol group <group-name> <vlan-id>
no protocol group <group-name> <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
<group-name> - a VLAN Group Name (a character string of 1 to 16 characters).
no - This command removes the <vlanid> from this protocol-based VLAN group that is identified by
this <group-name>.
Default Setting
None
Command Mode
VLAN database