© İnnosis Makine 7
User Responsibilities
The user is responsible for:
• Provide daily precheck start-up sheets.
• Transportation costs to an approved repair contractor.
• Parts shipping charges above those that are considered usual and customary.
• Local taxes, if applicable.
• Costs to investigate complaints unless the problem is caused by a defect in İnnosis
material or quality.
• Give timely notice of a part(s) failure and promptly making the product available for
repair.
• Performance of the required maintenance (including proper fuel, oil, lubricants, and
coolant) and items replaced due to normal wear and tear.
• Allowing İnnosis access to all electronically stored data and reports.
Limitations
İnnosis is not responsible for repairs if:
• Failures resulting from any use or installation that İnnosis considers improper.
• Failures resulting from attachments, accessory items, and parts not sold or approved
by İnnosis.
• Failures resulting from abuse, neglect, and improper storage (including installation of
parts and assembled components in contaminated systems) or repair (including
breakage of components because of being hard-faced or improperly welded).
• Failures resulting from the normal wear of manufactured products.
• Failures resulting from users’ delay in making the product available after being notified
of a potential product problem.
• Failures resulting from unauthorized repair or adjustments and unauthorized fuel
setting changes.
• Repair of components sold by İnnosis that is warrantied directly to the user by their
respective Manufacturer. Depending on the type of application, specific exclusions
may apply. Consult your İNNOSİS dealer for more information.
• Any hammering or steel on steel engagements.
• Failure to supply daily inspection sheets
To Next Page
Loading...