12 ESP-LX Modular Controller
Clear Programs
To make sure you begin programming with a “clean” setup, you
should clear the controller’s memory of existing program settings.
You can:
Clear settings for a single program
Clear settings for all four programs
Clear memory and restore the factory default program settings
(recommended for first-time installations)
Individual Program
Use this function to erase start times, watering days, and valve run
times for a single program. This function will not erase seasonal
adjust percentages, rain delay, advanced cycles, valve settings, or
special features.
Turn the dial to “CLEAR PROGRAMS.”
Use the program select switch to select the program you want
to delete. See page 17 for instructions.
NOTE: All settings for this program will be erased.
Make sure you have the correct program selected
before continuing.
The Clear Programs menu appears in the display.
Press “1” to select “Individual PGM.”
To Next Page
Loading...
