ESP-LX Modular Controller 7
BASIC PROGRAMMING
Definitions
Programming is the process of telling the controller exactly when
and how long you want to water. The controller opens and closes
the remote control valves according to the program you set.
Each program contains:
Days to water—the specific days of the week on which
watering takes place (for example, Monday, Wednesday,
Friday), or the watering interval (for example, every third day,
or only on even or odd days of the month).
Watering start time(s)—the time(s) of day that the program
begins; this is the time that the first valve in the program
begins watering; all other valves in the program then follow in
sequence.
NOTE: The term “start time” refers to the time that a
program starts, not to the time that each individual
valve begins to run.
Valve run time—the number of minutes (or hours and
minutes) that each valve runs.
To Next Page
Loading...
Need help?
General
