ESP-LX Modular Controller 41
Backup Programs — Contractor Default™
All program information you enter is stored in non-volatile memory
so it will be retained if power to the controller is interrupted. The
backup feature lets you store backup copies of programs A through
D so you can easily recall them if necessary. You can recall
programs manually or automatically, on a time delay.
This feature can be useful if program settings are unintentionally
changed and you want to go back to the original program settings
you entered.
Store Programs
Turn the dial to “SPECIAL FEATURES.”
The Special Features menu appears.
Press “2” on the Special Features menu.
The Backup Programs menu appears.
Press “1” on the Backup Programs menu.
A warning message appears in the display. Press and hold
“Yes” to store all program information. Press and hold “No” to
skip storing the programs.
If you press “No” (or you don’t respond within several
seconds), the message “No change made” appears. Then the
Special Features menu reappears.
To Next Page
Loading...
Need help?
General
