22 ESP-LX Modular Controller
Press “+” or “–” to change the cycle to:
ODD: The program waters only on odd-numbered days
of the month, including the 31
st
.
ODD31: The program waters only on odd-numbered
days of the month, except the 31
st
and February 29
th
. Use
this setting if local regulations prohibit watering on two
consecutive days of the month.
EVEN: The program waters only on even-numbered days
of the month.
NOTE: Any days you turn OFF via the Custom
cycle will override watering days set via Odd, Odd31,
or Even cycles. For more information, see the note on
page 19.
Cyclical
Turn the dial to “ADVANCED CYCLES.”
The display shows the currently selected program and its
current watering day cycle. If the program you want is not
displayed, use the program select switch to change it. See page
17 for instructions.
To Next Page
Loading...
