ESP-LX Modular Controller 23
Press “+” or “–” until “CYCLICAL” appears in the display.
Press “More.”
The display shows the number of days remaining until a
watering day and the number of days in the cycle. The “Day
Cycle” number flashes.
Press “+” or “–” to change the number of days in the cycle,
from 1 to 31. For example, if you want to water every other
day, set the Day Cycle to “2.” If you want to water once a
week, set the Day Cycle to “7.”
Press “Next.”
The “Days remaining” number flashes. Press “+” or “–” to
change the number of days until the next watering day. “0”
means that today is a watering day. So if you want watering to
begin tomorrow, set the days remaining to “1.”
NOTE: Any days you turn OFF via the Custom
cycle will override watering days set via a Cyclical
cycle. For more information, see the note on page 19.
When you have finished setting the “Day Cycle” and the
“Days Remaining,” press “Back.”
To Next Page
Loading...
