ESP-LX Modular Controller 65
Reset Controller
If the display of the ESP-LX Modular controller “freezes” and the
controller stops responding to commands, you may be able to reset
the internal circuitry. Resetting the controller will cancel any
watering that my be occurring at the time, but the controller will
retain the date, time, and all programming information.
Unlock and open the controller cabinet.
Use the crescent-shaped cutout to grasp the face panel and
open it on its hinges.
Locate the recessed compartment labeled “RESET” on the
back of the face panel.
Insert the tip of a pencil into the RESET compartment.
Momentarily press the small button with the pencil tip.
The Rain Bird logo appears briefly in the display. The display
then shows “Auto” and the time of day.
To Next Page
Loading...
